To do an inventory audit, set the scope and cut-off, freeze stock movement, prepare locations and tags, count blind, recount differences, compare the count to your book record, approve adjustments, and find root causes. Each step below gives simple actions for your team. The steps suit warehouses, plants, hospitals and government sites.
An inventory audit checks your book record against the stock on site. The goal is a record that your finance team, your auditors and your leaders can trust. Weak preparation causes many count problems. Good preparation makes the count itself simple. Your auditor may observe and test the count. The count itself is a separate job.
Step 1: Define the scope and the cut-off
Write down what the audit covers before anyone counts. A clear scope stops arguments later.
- Sites and areas. List each building, yard, room and cage.
- Stock types. List raw material, work in process, finished goods, spare parts and supplies. In a hospital, list the supply rooms, the central supply area and the pharmacy shelves.
- Stock you do not own. Decide how to treat stock that belongs to others, and stock held at outside locations.
- The book record. Name the system, and save a copy of the data at the cut-off.
The cut-off is the exact point in time that the count measures. Record every receipt and shipment before that point in the same period as the count. Every movement after that point belongs to the next period. Record the last receiving document and the last shipping document before the cut-off. Your team will need both in Step 6.
Step 2: Freeze movement
Stock that moves during the count gives a false result. A unit that counters see in one aisle can be counted again in another aisle after a transfer.
Stop receipts, issues, transfers and returns in the areas under count, or log each one so it goes to the correct period. If the site cannot stop all movement, use one of these methods:
- Count one zone at a time. Freeze the zone, count it, then release it.
- Move late arrivals to a marked hold area. Keep them out of the count until the count ends.
- Log every movement that must happen. Write the item, the quantity, the time and the person.
In a plant, finish or stage open work orders, and label work in process clearly. In a warehouse, hold new pick waves for the area under count. In a government site, close the issue desk for the area. Tell all staff the plan before the audit starts.
Step 3: Prepare locations and tags
A count is only as clean as the floor it covers. Do this work before counters arrive:
- Label every location so that a new person can find it.
- Put like items together. Open and mark mixed pallets and mixed bins.
- Set aside damaged, expired and unidentified items, and mark them clearly.
- Decide the unit of measure for each item: each, case or pallet.
- Assign each counter a defined area. Give each area a name or number.
- Number count tags or count sheets. Keep a log of who holds each one. Track each void and each replacement.
Do not give counters the book quantities. They need the item, the location and the unit of measure only. Keep the system quantities with a small control team.
Step 4: Run a blind count
In a blind count, the counter records what he or she sees. The counter does not know what the book says. This method reduces the pull to agree with the record. It gives you an honest view of the real stock.
Follow these rules during the count:
- Count every item in the assigned location. Record the item, the location, the quantity and the unit.
- Mark each counted location, so nobody counts it twice.
- Follow a set rule for sealed cartons and sealed packs, and use the same rule everywhere.
- In healthcare areas, record lot and expiry data only if your site rules require it.
- Walk each area after the count. Make sure that no location was missed and no tag is open.
Hold the count data in one place. Do not change a count because it "looks wrong". A wrong-looking count goes to Step 5.
Step 5: Recount the variances
Compare the blind count to the book record. Where the count and the record differ by more than the amount agreed before the count, recount those items.
Agree that amount before the audit, and write it down in your scope. Do not adjust any quantity yet.
A recount often shows a simple cause. Counters may have missed a location, used the wrong unit of measure, or read the wrong item code. Sometimes the count is right and the record is wrong. Fix the counting errors first. The differences that remain after the recount are real differences. They go to Step 6.
Step 6: Reconcile the count to the book
Now compare the confirmed count to the book record at the cut-off. This step belongs to your finance and operations team. They own the book record, and they know the transactions behind it.
For each remaining difference, ask these questions:
- Did a receipt or a shipment post on the wrong side of the cut-off?
- Did a transaction happen but never reach the system?
- Does the system use a different unit of measure from the one that counters used?
- Is the item at a different location from the one in the record?
- Is the item on site but missing from the book record, or on the book but not on site?
Use the last receiving and shipping documents from Step 1 to test timing differences. Write the cause next to each difference that you explain. Mark each difference that you cannot yet explain as open.
Step 7: Report and approve adjustments
Put the result in a written report. The report shows the scope, the cut-off, the variances, the recount results and the open items. It should let a reader who was not on site follow what happened.
Then approve the adjustments. Use this order:
- The finance or operations owner reviews each proposed adjustment.
- A person with authority approves it. This person should not be one of the counters.
- The team posts the adjustment to the book record and records the cause found for each variance.
- The team keeps the count sheets, the recount records and the approvals as a trail.
Follow your own approval policy and your retention policy. In a government site, follow the agency rules for write-offs and for property records. In a hospital, follow your site rules for adjusting supply records.
Step 8: Find the root causes
An adjustment fixes the number. It does not fix the reason for the difference. Group your variances by cause, and look for patterns:
- Receiving errors, such as wrong quantity or wrong item entered.
- Unit-of-measure mistakes between purchase, storage and issue.
- Unposted issues, transfers and returns.
- Items moved without a record.
- Damaged or expired stock that nobody removed from the book.
- Weak location labels that make items hard to find.
Pick the causes that affect the most items or the most value. Assign an owner and a fix for each one. Then count the same areas again later, and see if the pattern has changed. Some teams use a cycle-count program for this follow-up. A cycle-count program counts small parts of the stock on a regular basis, so errors do not build up.
When to bring in a third party
You can run an inventory audit with your own team. Some situations need an outside team:
- You need independence. A lender, a buyer or an auditor may want a count that your own staff did not perform. A third-party physical inventory audit gives that separation.
- Your people cannot leave daily work. Plants, warehouses and hospitals cannot always release staff for a full count.
- The stock is large or spread across sites. Many locations need one method and one set of rules.
- Your team has not counted in a long time. An experienced crew brings a tested method.
External auditors may also attend your count. PCAOB AS 2510 says that "Observation of inventories is a generally accepted auditing procedure." When a physical count alone sets the quantities, and all counts are made at or within a reasonable time of the balance-sheet date, the auditor ordinarily needs to be present at the count. [S1] PCAOB standards apply to audits of public companies and SEC-registered broker-dealers. Most private-company audits follow AICPA standards. Your auditor decides what to observe. Ask your auditor what the audit needs before you plan the count.
When you compare inventory audit companies, ask who does the counting, how recounts work, who owns the data, and how the provider treats items it cannot find. Ask for these answers in writing.
Get help with your inventory audit
CPCON counts warehouses, plants, healthcare sites and government facilities. We bring blind counts, recounts and a written variance report, and your team approves the adjustments. See our inventory audit services. For a view of what an audit covers and what you receive, read inventory audit scope and deliverables. For the count itself, see our physical inventory counts.
30+ years. 2,500+ clients. Projects on every continent.
Plan your audit
Tell us about your site, your stock and your cut-off date. We will help you plan the steps above.
Book a free count-readiness call
Sources
- [S1] PCAOB, AS 2510 "Auditing Inventories", paragraphs .01 and .09: https://pcaobus.org/oversight/standards/auditing-standards/details/AS2510 (read 2026-11-18).
